UNF 10 X 32 BaerCoil Inserts

Product information

BaerCoil Wire Thread Inserts UNF No. 10 x 32 - 1.0 D (4.83 mm) 100 pcs.

BaerCoil® thread inserts provide a long-lasting and powerful thread connection and scrap recovery. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant, holding your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are often used in automotive, electrical, medical, lightweight construction, and aerospace applications.

For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. Often this thread is also called STI thread (STI=Screw Thread Insert).

BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.

BaerCoil® thread inserts can be shortened with a side cutter or similar, according to the required length.

Dimensions

Diameter	No. 10
Pitch	32
Dimension	UNF No. 10 x 32
Length	1,0 D
T (Length when installed)	4,83 mm
Thread length calculation	1.0 D means 1 times the diameter: 1 times 4.83 mm=4.83 mm The nominal diameter for UNF No. 10 is approx. 4.83 mm

Characteristics

Product group	Wire thread inserts
Product type	BaerCoil wire thread inserts
Thread standard	UNF: American Fine Unified National thread according to ANSI B1.1
Direction	Right
Type	free running
Tensile strength at room temperature	>1400 N/mm²
Material	Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301)
Temperature resistance	315°C long-term 425°C short-term

Applications

All normal uses for thread repair and thread reinforcement

Technical drawing

Diameter	No. 10
Length	1,0 D
T (Length when installed)	4,83 mm
F (Min. - Max. outside diameter of thread insert)	0,227 '' - 0,256 ''
P (depth)	The thread insert must sit 1/4 - 1/2 turns below the surface
B (thread depth with chamfer)	0,299 ''
D (minimum depth of the core hole, without tip)	0,331 ''