UNIBURR PLUS #1816 The UNIBURR is a deburring tool
The PLUS Tool offers a longer life and the ability to chamfer harder metals.
The UNIBURR is a deburring tool bit that quickly repairs damaged bolts to thread nuts in place once more, saving you time and money. The UNIBURR simplifies the repair process, potentially fractionalizing repair time, as well as bypassing the need to replace expensive or hard to find hardware while keeping safety at a previously unattainable level.
Only use 0-600 RPMs on your power drill (Low Speed). Using high speed causes work piece to be hardened, forcing the tool to work harder and shorten its life span.
Never use tool on reverse as it results in immediately dulling the cutting edge.
THE ROOKIE GUIDE TO VOIDING YOUR WARRANTY
To quickly destroy your Uniburr tool and void the warranty, you can follow these simple steps
Run On High Speed
Run On Reverse
Use On Steel that is Tougher Than The Tool
This tool does not chatter.
This tool does not over heat the work piece.
This tool does not over heat or spark.
Threads are sheared off, not folded over as happens with a grinder.
This tool is the only external chamfer device that holds a patent for hand power drill use.
The difference between this tool and any other method is time saved. And time is money.
This tool works by way of shearing metal layer by layer. So there are some important things to know about using the Uniburr. The most important thing to know is this: THE SLOWER THE BETTER. Using the lowest speed on your drill (0-600 RPMs), apply decent pressure and the tool will do the rest. Remember that we’re not making metal pencils; We’re removing damaged threads to allow an easy nut start. Remove only the amount of material from the work piece that you need, and you will preserve the life of your Uniburr.
Most repairs only require removing a single thread. The Uniburr is a cutter, and just like a drill bit it will reach the end of life depending on how you use the tool. Slow speed along with no unnecessary cutting and the use of cutting oil or another lubricant will bring your Uniburr long life. Refrain from turning every work piece into a pencil, and you’ll keep the Uniburr cutting edge sharp for much longer.
92 Rockwell Coating Lasts 2x Longer
Fits size 8-32 bolts (.164) up to 3/4″-10 (.750) - (4mm -19mm)